5 Elektrický kladkostroj Tun s designem s nízkou světlou výškou

Traditional electric hoists require significant headroom between the hook’s highest point and the supporting structure (beam or ceiling). This distance, often called the “hook approach” or “minimum headroom,” includes the hoist body, hákový blok, and safety clearances. In facilities with low ceilings, mezzanines, maintenance pits, or dense equipment layouts, this traditional requirement can make standard hoists unusable or force costly structural modifications.

Our Solution: Intelligent Low Headroom Engineering

Our 5-ton hoist tackles this head-on with a design philosophy focused on vertical compaction:

• 1. Optimized Housing & Component Layout: The hoist body is meticulously designed with a compact profile. Critical components like the motor, převodovka, and drum are arranged and shaped to minimize the overall height dimension without compromising strength or performance.
• 2. Integrated Hook Block Design: Unlike hoists where the hook block hangs significantly below the body, our low headroom design often features a hook block that nests more closely or is integrated into the hoist frame itself. This drastically reduces the distance from the top mounting point to the bottom of the hook.
• 3. Efficient Reeving System: The wire rope reeving path is engineered for maximum compactness, minimizing the space needed between the drum and the hook block sheaves.
• 4. Precise Drum Positioning: The wire rope drum is positioned optimally relative to the lifting mechanism and hook block to achieve the shortest possible rope path and overall stack height.

5 Ton Low Headroom Electric Hoist: Technické specifikace

Parametr	Specifikace
Zvedací kapacita	5 tun (10,000 lbs / 4,536 kg)
Minimum Headroom	As low as 12 inches (300 mm)
Výška zdvihu	Přizpůsobitelné (Norma: 20 ft / 6 m)
Rychlost zvedání	8 m/můj (26 ft/min) (Single-speed)
Povinná třída	FEM 1:00 / RELOD THE4
Výkon motoru	7.5 kW (10 HP)
Napájení	3-Fáze, 380-480V AC, 50/60 Hz
Drátěné lano	Ø13 mm (½ inch), Stupeň 1770 (IPS)
Hook Approach	Ultra-compact integrated design
Travel Speed	20 m/můj (65 ft/min) (Trolley-dependent)
Bezpečnostní prvky	– Overload limiter (110% capacity) – Upper/lower limit switches – Emergency stop – Thermal motor protection
Dimensions (L×W×H)	850 × 580 × 320 mm (33.5 × 22.8 × 12.6 in)
Čistá hmotnost	≈ 480 kg (1,058 lbs)
Okolní teplota	-20°C až +60 °C (-4°F to 140°F)
Řízení	Přívěšek / Radio remote (IP65)
Certifikace	CE, ISO 9001, GOST (Přizpůsobitelné)

Key Low-Headroom Advantages in Design

• 1. Hook-to-Ceiling Clearance

  • Traditional 5-ton hoists: ≥ 600 mm (24 in)
  • This model: ≤ 300 mm (12 in)
    → Saves 50% vertical space.

• 2. Integrated Hook Block

  • Flush-mounted sheaves reduce “stack height” by 35% vs. conventional designs.

• 3. Optimized Drum Placement

  • Short rope path from drum to hook minimizes wasted space above the load.

• 4. Compact Trolley Compatibility

  • Works with low-clearance trolleys (NAPŘ., 150 mm/6 in height) for total system space efficiency.

Structural Requirements

Item	Requirement
Support Beam Min. Výška	≥ Headroom + Výška zdvihu + Safety Margin (200 mm)
Beam Width	≥ 150 mm (6 in)
Dynamic Load Capacity	≥ 6.5 tun (130% of hoist weight + zatížení)

Tangible Benefits of Low Headroom

• 1. Work Where Others Can’t: Install the hoist in facilities with exceptionally low ceilings, under mezzanines, inside pits, or in areas crowded with pipes, ducts, or other overhead obstructions where a standard 5-ton hoist simply wouldn’t fit.
• 2. Maximize Clear Lift Height: With less space consumed by the hoist mechanism itself, more of your available vertical space is dedicated to the actual lift path. Lift loads higher within the same building envelope.
• 3. Reduce Structural Costs: Lower headroom requirements often translate to less demanding support structure needs. This can potentially save costs on building modifications or allow installation on existing structures that couldn’t support a taller hoist.
• 4. Enhanced Versatility: Opens up lifting capabilities in retrofit applications, older buildings, údržbové prostory, workshopy, and specialized manufacturing cells where space is at a premium.
• 5. Improved Safety: Enables safe and efficient lifting in confined spaces that might otherwise require risky manual handling or impractical workarounds.

Key Specifications Highlighting Low Headroom

• 1. Zvedací kapacita: 5 tuny (10,000 lbs) – Full power delivered in a compact form.
• 2. Ultra-Low Minimum Headroom: Achieves hook approach distances significantly lower than standard hoists – often measured in mere inches/cm below the support beam. (Specific measurement will depend on model – e.g., “As low as 12 inches / 300mm”).
• 3. Compact Overall Height: The total height of the hoist unit itself is minimized.
• 4. Robustní konstrukce: Engineered for durability and reliable 5-ton performance, even with the space-saving design.
• 5. Standard Features: Includes overload protection, tepelná ochrana, emergency limit switches, and a reliable control system (pendant and/or radio remote options).

5 Ton Electric Hoist With Low Headroom Applications

• 1. Automotive repair shops (especially pits)

• 2. Manufacturing facilities with low ceilings or dense overhead utilities

• 3. Maintenance departments in confined spaces

• 4. Warehouses with mezzanine levels

• 5. Foundries and fabrication shops

• 6. Power plants and utility substations

• 7. Any application where vertical space is critically limited

Don’t let low ceilings prevent you from leveraging the efficiency and safety of electric lifting. Our 5 tunový elektrický kladkostroj with its innovative low headroom design provides the heavy-duty lifting solution you need, precisely where you need it. Experience the power to lift more, in less space.