Electric Hoist Overload Protection

What Is Electric Hoist Overload Protection?

Overload protection is a safety mechanism integrated into electric hoists to prevent the lifting of loads that exceed the hoist’s rated capacity. Exceeding the safe working load can cause mechanical failure, equipment damage, or serious workplace injuries. Therefore, overload protection plays a crucial role in maintaining safe and efficient operations.

Why Is Overload Protection Important?

• 1. Worker Safety
  Overloading can cause a sudden drop or failure of the hoist, posing serious safety risks. Overload protection minimizes the risk of accidents by stopping the hoist when excessive loads are detected.

• 2. Equipment Longevity
  Continuous operation under excessive loads strains motors, gears, and structural components. Overload protection prevents such stress, extending the hoist’s operational life.

• 3. Compliance with Regulations
  Safety standards like OSHA, Исаа, and ASME require lifting equipment to have reliable safety mechanisms, including overload protection. Compliance helps avoid legal issues and ensures workplace safety.

• 4. Cost Savings
  Avoiding damage to hoists and loads through overload protection reduces maintenance costs, downtime, and the risk of replacing damaged equipment.

Types of Overload Protection in Electric Hoists

• 1. Mechanical Overload Protection

  • Slip Clutch: When the load exceeds the rated capacity, the clutch slips to prevent the motor from applying further lifting force.

  • Shear Pin: A mechanical pin breaks under excessive load to stop hoist operation, protecting other components.

• 2. Electrical Overload Protection

  • Current Sensing Relay: Monitors the electrical current. If the current exceeds a preset limit (indicative of overload), the relay shuts down the motor.

  • Load Cells with Limit Switches: Electronic load sensors monitor the load weight and trigger a shutdown if it exceeds the threshold.

• 3. Electronic/Smart Overload Protection

  • Advanced hoists use programmable logic controllers (PLC) and digital load monitoring systems to detect and respond to overload conditions in real time, often displaying warnings on control panels.

How Does Overload Protection Work?

Here’s a typical operational flow:

• 1. Load Detection: A sensor or mechanical component detects the weight on the hook.

• 2. Monitoring: The system compares the load to the preset safe limit.

• 3. Trigger Mechanism: If the load exceeds the limit, a relay or mechanical device is triggered.

• 4. Shutdown: The hoist motor is stopped or disengaged to prevent damage.

• 5. Alarm (Сайн дурын): Some systems trigger a visual or audible alarm to alert the operator.

Tips for Using Overload Protection Effectively

• Never rely solely on overload protection: Always know your load weight before lifting.

• Regular Inspection: Ensure the overload protection system is tested and calibrated regularly.

• Train Operators: Educate personnel on load limits and proper hoist use.

• Use Certified Equipment: Ensure your hoist meets industry standards for overload protection.

Conclusion

Electric hoist overload protection is not just a feature—it’s a necessity. It safeguards lives, protects equipment, and ensures compliance with safety regulations. Whether you’re operating a small workshop hoist or a large industrial lifting system, investing in a hoist with reliable overload protection is critical for smooth, safe operations.