Guia elétrica para metalúrgica

Weihha, um fabricante líder de guindastes e talhas na China, offers electric hoists specially engineered for metallurgical environments, delivering enhanced heat resistance, safety mechanisms, and operational reliability.

Weihua’s electric hoist for metallurgical use is designed specifically for lifting molten metal and other high-temperature materials in harsh environments. The hoist system adheres to the GB/T 3811-2008, JB/T 9008.1-2004, and other international standards, ensuring durability, segurança, and precise control.

Electric Hoist For Metallurgical Key Features

• Resistência a altas temperaturas: Equipped with heat insulation plates and heat-proof wires, components are protected against temperatures up to 300°C.

• Double Brake System: Features a mechanical and electromagnetic dual brake structure for enhanced operational safety.

• Proteção contra sobrecarga: Intelligent monitoring and automatic shut-off in case of overload, preventing accidents and equipment damage.

• Controle de precisão: Variable frequency drive (VFD) for smooth lifting and positioning of molten materials.

• Heavy-Duty Design: High-strength steel wire ropes, thermal insulation gaskets, and Class H insulation motor.

• Explosion-Proof Option Available: For environments with flammable gases or dust.

• Safety Redundancy: Equipped with a limit switch, upper-lower position alarm, and temperature monitoring device.

Guia elétrica para metalúrgica Especificações Técnicas

Modelo	Capacidade de carga	Altura de elevação	Velocidade de levantamento	Velocidade de viagem	Dever de trabalho	Fonte de energia	Temperatura ambiente	Classe de isolamento
WH-MH5T	5 toneladas	6–12 m	8 m/meu (VFD)	20 m/meu	M6	3Ph., 380V, 50Hz	-20°C to 300°C	Classe H
WH-MH10T	10 toneladas	6–16 m	7 m/meu (VFD)	20 m/meu	M6	3Ph., 380V, 50Hz	-20°C to 300°C	Classe H
WH-MH15T	15 toneladas	6–20 m	6 m/meu (VFD)	20 m/meu	M7	3Ph., 380V, 50Hz	-20°C to 300°C	Classe H
WH-MH20T (personalizável)	20 toneladas	6–24 m	5 m/meu (VFD)	20 m/meu	M7	3Ph., 380V, 50Hz	-20°C to 300°C	Classe H

Observação: Custom specifications are available upon request, including anti-explosion features, controle remoto sem fio, and higher working duty classifications.

Optional Add-ons and Customization

• 1. Wireless remote control or semi-automatic control systems

• 2. Grua elétrica à prova de explosão or flameproof models (Exd IIBT4, Exd IICT4 for Zone 1 & Zona 2)

• 3. Integration with overhead bridge cranes, ladle cranes, and automation systems

• 4. Load limiters, electronic weighing, and data recorders

Engineering Excellence: Design & Material Innovation

Weihua’s metallurgical electric hoists are the result of decades of R&D and practical experience, especially in cooperation with large iron and steel enterprises. Key design innovations include:

• 1. Heat Shielding System: Multi-layer insulation system to protect electrical and mechanical components from radiant heat. The wire rope drum, hook block, and motor housing are thermally shielded with refractory materials.

• 2. Class H or Higher Insulation Motors: Motors with H-class insulation (up to 180°C tolerance), and optional water-cooled or forced-air cooling design for continuous duty.

• 3. Special Alloy Wire Rope: Tratado termicamente, corrosion-resistant wire ropes extend working life in high-temperature conditions.

• 4. Sealed Gearboxes and Bearings: Fully enclosed IP55–IP65 grade gearboxes and self-lubricated bearings extend lifespan and minimize maintenance even in dusty and humid plant conditions.

• 5. Programmable Logic Controller (CLP) Opção: Smart monitoring of lifting load, temperature, brake condition, and usage cycles. Enables predictive maintenance and minimizes downtime.

Expanded Use Cases Globally

South Korea – POSCO Steel Mill

Weihua delivered 12 sets of 10T metallurgical hoists to POSCO’s slab caster line. These hoists run at 95% duty cycle with thermal monitoring systems integrated into the plant’s MES (Manufacturing Execution System).

South Africa – Gold Refinery

Weihua provided customized electric hoists with corrosion-resistant coatings and spark-proof components, essential for handling molten alloys and ore concentrates in a gold purification furnace environment.

Germany – Copper Wire Manufacturer

Compact design 7.5T talhas elétricas de corrente com altura baixa with trolleys enabled efficient operation under tight workshop constraints.

Applications in Global Metallurgical Sectors

Weihua metallurgical electric hoists have been widely used in steel plants, foundries, aluminum refineries, and non-ferrous metal industries across multiple countries. Their reliability and robust build quality make them ideal for operations such as:

• 1. Handling molten iron in blast furnaces

• 2. Lifting ladles in continuous casting machines

• 3. Feeding raw materials into converters

• 4. Moving steel ingots, slabs, and coils

Why Choose Weihua for Metallurgical Lifting?

• Sobre 35 years of crane and hoist manufacturing experience

• ISO, CE, and SGS certified

• Global service network and support

• Proven reliability in high-temperature and heavy-load applications

Conclusão

Weihua’s electric hoist for metallurgical applications combines innovation, rugged engineering, and safety—making it the ideal choice for steel mills, smelting plants, and foundries worldwide. With tailored solutions, Weihua empowers metal industries to operate efficiently even in the harshest environments.