5 Електрична дизалица тона са дизајном мале висине

Traditional electric hoists require significant headroom between the hook’s highest point and the supporting structure (beam or ceiling). This distance, often called the “hook approach” or “minimum headroom,” includes the hoist body, hook block, and safety clearances. In facilities with low ceilings, mezzanines, maintenance pits, or dense equipment layouts, this traditional requirement can make standard hoists unusable or force costly structural modifications.

Our Solution: Intelligent Low Headroom Engineering

Our 5-ton hoist tackles this head-on with a design philosophy focused on vertical compaction:

• 1. Optimized Housing & Component Layout: The hoist body is meticulously designed with a compact profile. Critical components like the motor, мењач, and drum are arranged and shaped to minimize the overall height dimension without compromising strength or performance.
• 2. Integrated Hook Block Design: Unlike hoists where the hook block hangs significantly below the body, our low headroom design often features a hook block that nests more closely or is integrated into the hoist frame itself. This drastically reduces the distance from the top mounting point to the bottom of the hook.
• 3. Efficient Reeving System: The wire rope reeving path is engineered for maximum compactness, minimizing the space needed between the drum and the hook block sheaves.
• 4. Precise Drum Positioning: The wire rope drum is positioned optimally relative to the lifting mechanism and hook block to achieve the shortest possible rope path and overall stack height.

5 Ton Low Headroom Electric Hoist: Техничке спецификације

Параметар	Спецификација
Капацитет за дизање	5 тона (10,000 лбс / 4,536 кг)
Minimum Headroom	As low as 12 inches (300 мм)
Висина подизања	Прилагодљиво (Стандард: 20 фт / 6 м)
Брзина подизања	8 м/ми (26 фт/мин) (Single-speed)
Дути Цласс	ФЕМ 1ам / ОВАЈ4
Снага мотора	7.5 кВ (10 HP)
Повер Суппли	3-Фаза, 380-480V AC, 50/60 Хз
Вире Ропе	Ø13 mm (½ inch), Оцена 1770 (IPS)
Hook Approach	Ultra-compact integrated design
Travel Speed	20 м/ми (65 фт/мин) (Trolley-dependent)
Сигурносне карактеристике	– Overload limiter (110% капацитет) – Upper/lower limit switches – Emergency stop – Thermal motor protection
Dimensions (L×W×H)	850 × 580 × 320 мм (33.5 × 22.8 × 12.6 in)
Нето тежина	≈ 480 кг (1,058 лбс)
Температура околине	-20°Ц до +60°Ц (-4°F to 140°F)
Контрола	Привезак / Radio remote (ИП65)
Certifications	ЦЕ, ИСО 9001, ГОСТ (Прилагодљиво)

Key Low-Headroom Advantages in Design

• 1. Hook-to-Ceiling Clearance

  • Traditional 5-ton hoists: ≥ 600 мм (24 in)
  • This model: ≤ 300 мм (12 in)
    → Saves 50% vertical space.

• 2. Integrated Hook Block

  • Flush-mounted sheaves reduce “stack height” by 35% vs. conventional designs.

• 3. Optimized Drum Placement

  • Short rope path from drum to hook minimizes wasted space above the load.

• 4. Compact Trolley Compatibility

  • Works with low-clearance trolleys (Нпр., 150 mm/6 in height) for total system space efficiency.

Structural Requirements

Item	Requirement
Support Beam Min. Height	≥ Headroom + Висина подизања + Safety Margin (200 мм)
Beam Width	≥ 150 мм (6 in)
Dynamic Load Capacity	≥ 6.5 тона (130% of hoist weight + оптерећење)

Tangible Benefits of Low Headroom

• 1. Work Where Others Can’t: Install the hoist in facilities with exceptionally low ceilings, under mezzanines, inside pits, or in areas crowded with pipes, ducts, or other overhead obstructions where a standard 5-ton hoist simply wouldn’t fit.
• 2. Maximize Clear Lift Height: With less space consumed by the hoist mechanism itself, more of your available vertical space is dedicated to the actual lift path. Lift loads higher within the same building envelope.
• 3. Reduce Structural Costs: Lower headroom requirements often translate to less demanding support structure needs. This can potentially save costs on building modifications or allow installation on existing structures that couldn’t support a taller hoist.
• 4. Enhanced Versatility: Opens up lifting capabilities in retrofit applications, older buildings, одељци за одржавање, радионице, and specialized manufacturing cells where space is at a premium.
• 5. Improved Safety: Enables safe and efficient lifting in confined spaces that might otherwise require risky manual handling or impractical workarounds.

Key Specifications Highlighting Low Headroom

• 1. Капацитет за дизање: 5 Тоне (10,000 лбс) – Full power delivered in a compact form.
• 2. Ultra-Low Minimum Headroom: Achieves hook approach distances significantly lower than standard hoists – often measured in mere inches/cm below the support beam. (Specific measurement will depend on model – e.g., “As low as 12 inches / 300mm”).
• 3. Compact Overall Height: The total height of the hoist unit itself is minimized.
• 4. Робусна конструкција: Engineered for durability and reliable 5-ton performance, even with the space-saving design.
• 5. Standard Features: Укључује заштиту од преоптерећења, термичка заштита, emergency limit switches, and a reliable control system (pendant and/or radio remote options).

5 Ton Electric Hoist With Low Headroom Applications

• 1. Automotive repair shops (especially pits)

• 2. Manufacturing facilities with low ceilings or dense overhead utilities

• 3. Maintenance departments in confined spaces

• 4. Warehouses with mezzanine levels

• 5. Foundries and fabrication shops

• 6. Power plants and utility substations

• 7. Any application where vertical space is critically limited

Don’t let low ceilings prevent you from leveraging the efficiency and safety of electric lifting. Our 5 тона електрична дизалица with its innovative low headroom design provides the heavy-duty lifting solution you need, precisely where you need it. Experience the power to lift more, in less space.